Boatcatch™

• Boat Catch Weight: 16kg
• The standard mount arm in a large Boatcatch kit is 430mm long. 
• When assembled, it will span a gap of 610mm from the surface of the winch post to the point on the bow.
• Suit Boats: 6 metres to 8 tonne
• Note:  If your boat is between 5 and 8 tonne (10,000lb and 16,000lb) please contact us about suitable/heavy mounting brackets.
• Standard universal mount bracket fits around a 65-100mm   wide bow post

 Lifetime Warranty - (Lifetime for Original boat owner or 5 years from date of purchase)

• With only three moving parts, it requires little maintenance
•  Highly polished for a very attractive accessory to any trailer boat
• Available in two different sizes to suit both small boats under 6 metres long and large boats 6 metres and over in length

Important - Shipping Notice

• Delivery is free unless you fall into the area where a "long distance delivery surcharge" of $30 applies.

• If your postcode is NT 0800-0886 or QLD 4675-4895 or WA 6216-6799 - Please pay an additional $30 for shipping when checking out OR BUY IT NOW and wait for us to revise your invoice before payment.

• Should you purchase, and then we find you are in a remote location, we reserve the right to reverse your purchase giving a full refund.

** WATCH Extended Demo Video **

** WATCH How to Install Boat Catch **

FREQUENTLY ASKED QUESTIONS

• Yes, It fits almost any boat & trailer.  Whether you've got a small 'alloy' boat, a large fibreglass boat or even a cat, you can cut the supplied mounting arm and position the Boatcatch to suit just about any boat and trailer conbination!
• Yes, Its easy to launch:  Once fitted it's ready to use.  When about to launch, you simply prepare by releasing the winch cable from your boat in the parking lot.  After which, reverse the trailer inot the water.  Boatcatch allows you to move around until you choose to remotely pull the release lever and calmly motor off.
• Yes, It's fast retrieval:  Position the trailer in the water and when ready, drive your boat in.  The Boatcatch has a heavy duty pin that locates inside the eye automatically when retrieving  and secures the boat upon the trailer.  It's incredibly strong so you can easily drive your vehicle to the parking lot before having to secure the wince cable.
• Yes, Most can fit the Boatcatch:  Most handymen who own a drill and some basic spanners can fit a Boatcatch.  The device is clamped simply and directly to the trailer bow post with 'u' bolts and nuts.  The most technical job is cutting the metal universal mounting kit 'tube' to length and a hand saw or similar too.
• Yes, It fits different trailer sizes:  The device comes in two sizes of the same design.  The small size may be fitted to all aluminium boats under 6 meters long and light duty fibreglass boats under 6 meters.  The large unit will accommodate a vessel as small as 6 meters and a boat of any length and having a maximum weight of 8 tonne.
• Boatcatch won't break:  The device comes in two sizes of the same design.  The small size may be fitted to boats under 6 meters (20ft) long.  The large until will accommodate a boat 6 meters (20ft) or over in length, but having a maximum weight of 8 tonne (16,000lb).   Note, if your boat is inbetween 5 and 8 tonne (10,000lb and 16,000lb) please contact us about suitable/heavy mounting brackets.
• Operating Boatcatch:  One or two people can be used to launch and retrieve with a Boatcatch.  The two person method chosen by most operators is where you have an operator for the boat and a driver the car and trailer.  When well practiced this makes for a speedy ramp work.